Overview of Raplacing Hood/Bonnet Hinges Spares Rebornor Auto Part Genuine Supplies Introduction BY:Peter
Overview of Raplacing Hood/Bonnet Hinges Spares
Rebornor Auto Part Genuine Supplies Introduction
The hinge of the engine hood is a key component connecting the hood and the body, and its main function is to support and adjust the opening and closing of the hood.
Photo: Rebornor genuine hood hinges products for GWM models.
Composition
Hinge arm: connects the body to the hatch cover and bears the main load.
Hinge shaft: allows the hinge arm to rotate to achieve the opening and closing of the hatch cover.
Fixed bracket: The hinges are fixed to the body and hatch cover.
Spring or pneumatic support rod: auxiliary support to help keep the hatch open.
Type
Traditional hinge: simple structure, low cost, but inconvenient adjustment.
Pneumatic hinge: With pneumatic support rod, easier operation, common in modern vehicles.
Brief process for part replacement operation of bonnet hinge
1. Prepare
①Tools: wrench, screwdriver, torque wrench, lubricant.
②Safety measures: Wear gloves and goggles, make sure the vehicle is parked on a flat ground and tighten the handbrake.
2. Remove the old hinge
①Open engine cover: Use support rods or have an assistant secure the cover.
②Remove upholstery panels (if any) : Remove the upholstery panels on the inside of the hatchcover to expose the hinge retaining bolts.
③Mark position: Mark hinge position with marker for easy alignment during installation.
④Loosen the bolt: Use a wrench or socket to loosen the bolt connecting the hinge to the body and hatch cover.
⑤Remove old hinges: Remove old hinges carefully to avoid damaging surrounding components.
3. Install new hinges
①Install new hinges: Align the new hinges with the marked position and initially secure the bolts.
②Adjust position: Make sure the hinges are aligned with the body and hatch, and fine-tune if necessary.
③Tighten the bolt: tighten the bolt according to the torque value specified by the manufacturer to avoid too tight or too loose.
Photo: Overview of Rebornor genuine hood hinges products.
4. Test and adjust
①Test opening and closing: open and close the hatch cover several times to check whether it is smooth.
②Adjust the hinge: If there is stuck or misalignment, readjust the hinge position.
③Lubrication: Apply lubricant to hinge shaft and moving parts to ensure smooth operation.
5. Finishing touches
①Install upholstery panel: Reinstall the removed upholstery panel.
②Cleanup tool: The cleanup tool cleans up the work area.
③Final check: Make sure the hatchcover opens and closes properly and the hinges are firmly fixed.
6. Precautions
①Safety first: Ensure that the hatch cover is secure during removal and installation to avoid accidents.
②Follow torque specification: tighten bolts strictly according to manufacturer's requirements to prevent thread damage or loosening.
③Check other parts: When replacing hinges, check the support rod and latch to make sure they are working properly.
Photo:Overview of Rebornor genuine hood hinges products.
In the future, Rebornor will continue to focus on automobile aftermarket and expand the scope, continuously improve its service quality, and provide more customers with one-stop automotive spare parts solutions.
We hope this article is helpful for you, We not only provide high quality products, but also offer professional pre-sales and after-sales services.
Whether you need advice on product specifications or have a problem with a product in use, our team is always on hand to provide support and advice, and we firmly believe that customer satisfaction is the key to our success.
Therefore, working hard to ensure that our products are not only of high quality but also cost-effective has made Rebornor one of the preferred suppliers for many of our customers.
- We are committed to providing customers with one-stop auto parts, Rebornor is a professional service provider of all kinds of auto parts, if you are interested in our products, you can contact us directly through the mailbox, if necessary, you can also use WhatsApp for quick consultation.
- contact us
————————————————————————————————————————————————————————————————
[Platform release disclaimer]This platform part of the article picture source or adapted from the Internet, the main purpose is to share information, so that more people get the information they need, the copyright belongs to the original author, such as infringement of your rights and interests or copyrights, please let us know in time, we will be deleted within 24 hours!
